Filter By:
- Bikes (611)
- Components (8372)
- Accessories (4394)
- Apparel (1248)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Shop
Before the Pika, gaining traction on gravel roads was a true feat. Now, it’s child’s play. Ramped center knobs roll fast on loose gravel, and U-shaped shoulder knobs dig in on the turns. The Pika is equipped with dual compound tread, EPS protection, and wire bead.
- More durable and quiet resin compound than previous DB-210 pads
- Anti-vibration elastomer behind pad further reduces noise
- Magnetic spring in caliper & physical spring between pads for fast and consistent pad return
- Visual wear indicator shows if your pads need to be replaced, without removing them
- Chamfering at the bottom eases wheel insertion, for race-fast wheel changes
- Loops at top of the pads act as cooling fins for improved heat dissipation
- Waterproof IPX7: Operates even after 30 minutes of submersion in a depth of 1 meter
- 3x brighter than EL135
- OptiCube lens technology
- Low battery indicator
- Mode memory function
- Two light modes (Constant / Flashing)
- Replaceable bracket spacer
- FlexTight bracket
- Runtime : Constant: 30 hours (50 lumens) (Approx.) Flashing: 250 hours (50 lumens)
- Battery type : 2 x AA alkaline battery
- 5 ultra bright LEDs
- Design offers high visibility
- 3 modes: rapid, flashing, constant
- Run time: R - 60h to 120h, F - 40h to 120h
- 2x AAA batteries included
- FlexTight bracket
- Complete, high quality bicycle reflector set
- Includes 1x RR-165-BPR Rear reflector (red), 1 x RR-165-BP2W front reflector (white) and 2x RR-550N-WUW wheel reflectors (white)
- Also includes brackets to mount on most seatposts and handlebars
- Made with USDA-certified organic ingredients
- Natural honey sandwiched between 2 thin waffles
- Allergens: contains wheat & soy, may contain traces of eggs
- Ideal fit for very short stems with steep upward stem angles
- 1cm rise in the base will allow larger cycling computers like the Garmin 1030 to nest securely above the stem without interference
- Eten-I rounds out the lower end of the KS internally routed dropper post spectrum with a post that is perfect for new riders just getting used to the idea of on-the-fly seat height adjustment or more experienced riders looking for a value-priced solution.
- Eten-I uses the same head and cartridge as the Eten Remote but moves the cable interface to the bottom of the post for compatibility with frames accommodating internally routed cables.
- Includes: Footwear Shield, Bike Shoe Cleaner, Foam Fresh, premium Shoe Brush, Microfibre cloth and storage tote bag
- Bike Shoe Cleaner removes dirt, grime and odors
- Footwear Shield is a spray on water repellant
- Foam Fresh helps break down hard to remove dirt and grime
- Take your recovery to a whole new level
- 20 grams of Plant based Protein
- Whole Superfoods, Chia & Flax Seeds
- Omega-3, fiber, and antioxidants for digestive health and more
Compatible with all Presta pump heads and most sealant injectors, Fillmore is backward-compatible with whatever you got, and forward-thinking in every way. Made for mountain, gravel and 'cross rims up to 28mm deep, Fillmore is one of those upgrades you don't know you need until you try it.
- Airflow - 3 times standard Presta air flow, easing tubeless tire set-up and reducing pumping force
- No clogging - Patented poppet-style design eliminates clogging by shielding air hole from contact with sealant
- Simplicity - Ability to inject sealant without removal of valve core simplifies maintenance
- Adjustable - Micro-air adjustment feature allows for precise trail-side pressure changes
- Protects high risk areas of the fork from rock chips, wear & scratches
- Fits all makes, models and sizes
- Designed for maximum coverage with minimal trimming
- Designed around mountain bike fork geometry
- Fork coverage ~60%. Includes crowns, lowers, and extra pieces
- Easy install and high durability
- Each kit includes installation instructions, cleaning wipe, squeegee, install solution & microfibre cloth
- Self-healing. Minor marks and scuffs will disappear with the warmth of a sunny day
- A low surface energy means that less dirt sticks to your bike and is easier to clean
- 10 year warranty against discoloration and cracking
- Available in either matte or gloss finish to match factory paint and is nearly invisible once installed
- Protects high risk areas from rock chips, wear & scratches
- Designed around road and gravel bike geometry
- Fits all makes, models and sizes
- Designed for maximum coverage with minimal trimming
- Frame coverage ~60%. Includes toptube, full downtube, 4 stays, seat tube and extra pieces
- Easy install and high durability
- Each kit includes installation instructions, cleaning wipe, squeegee, install solution & microfibre cloth
- Self-healing. Minor marks and scuffs will disappear with the warmth of a sunny day
- A low surface energy means that less dirt sticks to your bike and is easier to clean
- 10 year warranty against discoloration and cracking
- Available in either matte or gloss finish to match factory paint and is nearly invisible once installed
- Perfect finishing touch to a bike built
- 7075-T6 aluminum
- M5 x 15mm
- 4Nm max torque
- For water bottle cages only.
- Never use these aluminum bolts in a structural application.
- Christophe Vintage toe-clip
- Celebrating 130 years of history
- Steel cage
- Chrome finish
- 01: S/M; -02: L/XL
- Mini bell with quick release mount
- Unique bracket that tightens by simply applying pressure with finger
- Exceptional sound/travel for its size
- Fits 19mm to 26.4mm handlebar diameters
- Handlebar-mounted tubeless repair kit
- Discreet and neat finish, completely integrated inside the handlebar
- Anodized aluminum bar ends
- Tool-less expansion plugs fit internal bar diameters from 17.5mm to 21mm
- Easy to use: No need to dismount the tire
- Durable reparation of flats between 1 and 5mm
- Integrated holder for an additional chain link and a tubeless valve (link and valve not included)
- Includes tubeless plugs (3 x 2mm and 3 x 5mm), needle tool (reamer) and knife
- Weight: 75g
$0.10
- Standard metric-sized Stainless steel washers - 100 per tub
$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss 240s Shim Ring
$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$0.30 - $31.67
The buyer's choice for wheel builders looking to save weight.
ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond.
- 32 nipples weigh approximately 30 grams
$0.40
Hope Pad Clip
- Fits Tech and Tech Evo M4, X2, and V2 Brakes
$0.50 - $47.11
The buyer's choice for wheel builders looking to save weight.
The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use.
- Weight: starting at 20g for 64 nipples
$0.86 - $2.74
Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools.
• Made from hardened alloy tool steel
• Uses 7mm or 9/32" 12 pt box end/socket
• Sold singly or in pairs
$0.90
Replacement small parts for Hope disc brake Hope disc brake calipers.
$0.94
This is a single replacement pin for Park Tool HCW-4 and SPA-6 pin spanner wrenches.
$0.99
A lightweight aluminum adapter allows the use of a Schrader pump on Presta tubes.
Page 1 of 483
Next page