Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Lazer Sport Universal Rechargeable LED Taillight
$34.99
A helmet mounted taillight is an ideal way to help make sure you are seen in low light conditions The Lazer Universal LED mounts directly to any Lazer KinetiCore helmet. It can mount to any other helmet by using the included Velcro strap. COMPATIBILITY - Cityzen KinetiCore - Jackal KinetiCore - Nutz KinetiCore - Pnut KinetiCore - Strada KinetiCore - Vento KinetiCore - BATTERY TYPE: USB rechargeable - RECHARGE TIME: 2.5 hours - RUN TIME: 54 hours - LUMENS: 40 lumens - ATTACHMENT: Direct mount to Lazer KinetiCore helmets. Velcro mount to any helmet. - WEIGHT: 15g
Bontrager Helmet Buckles 
$4.99 - $6.50
Helmet buckles work hard to keep your helmets secure and to maximize safety. No matter what happens, these original replacements will get them working like new. Key features - Original replacement buckles for your Bontrager helmet - Compatible with all Bontrager helmets
Sugoi Zap 2.0 Helmet Cover
$45.00
The ultimate commuter helmet cover combrines a fully reflective fabric, with water and wind protection. - Sugoi's fully reflective and waterproof Zap fabric is designed for high visibility in low light - Two sizes to offer a wider range of fit possibilities
Planet Bike Shiner Helmet & Rack Mount
$5.99
Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks
Light & Motion Vis Pro
$139.99
Taking the ultimate helmet lighting system – the Vis 360 – to the next level, the Vis Pro features an ultra-powerful 600-lumen headlight optimized for commuting and bright enough for twisty singletrack! The featherweight system is waterproof for all-conditions reliability and has an integrated rear light/battery pack that balances the unit on a variety of helmets. An essential setup for those requiring maximum protective visibility with powerful illumination. Featuring: - 600 Lumen Output Certified to the FL-1 Standard - Daylight Visible Pulse Mode - Integrated Battery Pack With Red Rear Lighting - Innovative Amber Sidelights Provides Critical Side Visibility at Intersections - Ultra-lightweight Setup With Easy Clip On/Off Design - Waterproof to 1 meter For All-Conditions Reliability - Accurate Battery Charge & Status Indicator - Micro USB Rechargeable Included: - Helmet Mounts & Micro USB Charging Cable
Lazer Sport ATS LED Taillight
$11.99
A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions. The ATS LED Taillight only fits Lazer helmets equipped with the Advanced Turnfit System. - COMPATIBILITY: Bullet 2.0, Century MIPS, Century, Wasp Air Tri, Victor, Impala MIPS, Impala, Urbanize MIPS - BATTERY TYPE: LR41 button battery - RUN TIME: 37 hours - LUMENS: 4 lumens - ATTACHMENT: ATS dial - WEIGHT: 15g - MATERIAL: Nylon
Lazer Sport Aeroshell—Blade
$19.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - COMPATIBILITY: Blade+ MIPS, Blade+, Blade, Blade MIPS - ATTACHMENT: Blade or Blade+ helmet - WEIGHT: 45g - MATERIAL: Polycarbonate
Lazer Sport Aeroshell—G1
$24.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - COMPATIBILITY: G1 MIPS, G1 - ATTACHMENT: G1 helmet - WEIGHT: 45g - MATERIAL: Polycarbonate
Lazer Sport Aeroshell—Sphere
$22.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. Sizing: - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 61cm
Lazer Sport Aeroshell—Strada
$22.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
Lazer Sport Aeroshell—Z1
$24.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - COMPATIBILITY: Z1 MIPS, Z1 - ATTACHMENT: Z1 helmet - WEIGHT: 45g - MATERIAL: Polycarbonate
Lazer Sport BOB Padset
$6.00
Replacement Pads for Lazer's BOB Helmet
Lazer Sport Bullet 2.0 Airslide Front Cap
$17.99 - $24.99
A user adjutable cap for the Bullet 2.0 in order to provide airflow or maximize aerodynamics. - COMPATIBILITY: Bullet 2.0 - ATTACHMENT: Bullet 2.0 helmet - WEIGHT: 34g - MATERIAL: Polycarbonate
Lazer Sport Bullet 2.0 Closed Front Cap
$17.99
A closed cap for the Bullet 2.0 in order to block airflow and maximize aerodynamics. - COMPATIBILITY: Bullet 2.0 - ATTACHMENT: Bullet vent - WEIGHT: 21g - MATERIAL: Polycarbonate
No Image
$39.99
Magnetic mount lens for Lazer Bullet 2.0 helmet. The integrated lens is an integral part of the Bullet 2.0 helmet. It can be stored on the helmet surface using the magnetic docking when not in use. - COMPATIBILITY: Bullet 2.0 - ATTACHMENT: magnetic - WEIGHT: 24g - MATERIAL: Polycarbonate
Lazer Sport Bullet 2.0 Venturi Cap
$17.99
Venturi technology accelerates the airflow through the helmet. By creating an active air draw at the rear of the helmet, the Venturi cap increases airflow through the Lazer Bullet 2.0. - COMPATIBILITY: Bullet 2.0 - ATTACHMENT: Bullet 2.0 helmet - WEIGHT: 21g - MATERIAL: Polycarbonate
Lazer Sport Bullet Pad Set
$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Bullet and Bullet MIPS helmets. Set includes six pads - Two front pads, two top center pads, two top side pads. - COMPATIBILITY: Bullet, Bullet 2.0 - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
Lazer Sport Cameleon Rechargeable LED Taillight
$24.99
A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions. - COMPATIBILITY: Cameleon MIPS - RECHARGE TIME: 2 hours - RUN TIME: 24 hours - LUMENS: 5.2 lumens - ATTACHMENT: Rear vent - WEIGHT: 19g - MATERIAL: LED light
Lazer Sport Gekko Rechargeable LED Taillight
$24.99
A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions. - COMPATIBILITY: Gekko MIPS, Gekko, Lil'Gekko MIPS, Lil'Gekko - BATTERY TYPE: USB rechargeable - RECHARGE TIME: 2 hours - RUN TIME: 24 hours - LUMENS: 5.2 lumens - ATTACHMENT: Rear vent - WEIGHT: 19g - MATERIAL: LED light
Lazer Sport Impala Visor Screws
$6.99
Screws for Impala visor. - COMPATIBILITY: Impala MIPS, Impala - WEIGHT: 1g - MATERIAL: Aluminum
Lazer Sport Jackal & Impala Camera Mount
$9.99
Camera mount for Jackal and Impala helmets. - COMPATIBILITY: Jackal MIPS, Jackal, Impala MIPS, Impala - ATTACHMENT: Velcro - WEIGHT: 13g - MATERIAL: Nylon
Lazer Sport Mudcap - Z1 LED
$5.99
Keep the ARS fit system clear of debris and serves as a mount for LED taillight accessory. Note: not compatible with LifeBeam accessory. Adds protection to keep ARS retention system clear of debris on Z1 helmet. Also allows the Z-LED or Century LED taillights to be used with the Z1 helmet. - COMPATIBILITY: Z1 - ATTACHMENT: ARS mechanism - WEIGHT: 8g - MATERIAL: Polycarbonate
Lazer Sport Padding—Bullet
$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Bullet and Bullet MIPS helmets. Set includes six pads - Two front pads, two top center pads, two top side pads. - COMPATIBILITY: Bullet, Bullet 2.0 - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
Lazer Sport Padding—Cameleon
$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Cameleon MIPS helmet. Set includes four pads - front pad, two top side pads and top center pad. - COMPATIBILITY: Cameleon MIPS - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
Lazer Sport Padding—Coyote
$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Coyote and Coyote MIPS helmets. Set includes three pads - One front/top pad and two top side pads. - COMPATIBILITY: Coyote MIPS, Coyote - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
Lazer Sport Padding—G1
$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer G1 and G1 MIPS helmets. This is the standard padset. Set includes four pads - front pad, two top side pads and one top center pad. - COMPATIBILITY: G1 MIPS, G1 - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
Lazer Sport Padding—Impala
$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Impala and Impala MIPS helmets. Set includes three pads - One front/top pad and two top side pads. - COMPATIBILITY: Impala MIPS, Impala - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
Lazer Sport Padding—Jackal
$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Jackal MIPS helmets. Set includes one pad - Front/Top unipad only. - COMPATIBILITY: Jackal MIPS, Jackal - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
Lazer Sport Padding—Jackal
$6.99
Freshen up the interior of your helmet with a new pad set! - Replacement pads for Jackal helmets
Lazer Sport Padding—Sphere
$6.99
Freshen up the interior of your helmet with a new pad set! - Replacement pads for Sphere helmets - Attachment: Velcro - Material: Foam
Lazer Sport Padding—Urbanize
$9.99
Freshen up the interior of your helmet with a new pad set! Replacement padset for Lazer Urbanize MIPS helmets. Set includes two pads - one front pad and one top center pad COMPATIBILITY - Urbanize MIPS - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
Lazer Sport Padding—Z1 & Cosmo
$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Z1 and Z1 MIPS helmets. Set includes two pads - front pad and one top center pad COMPATIBILITY - Z1 MIPS - Z1 - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
Lazer Sport Screws - Jackal Visor
$6.99
Screws for Jackal Visor
Lazer Sport Strap Divider For Thick Straps
$3.99
Strap divider for thick Lazer helmet straps COMPATIBILITY - Blade+ MIPS - Blade+ - Tonic MIPS - Tonic - Coyote MIPS - Coyote - Chiru - Next+ - Cameleon MIPS - Compact DLX MIPS - Compact DLX - Compact - J1 - Gekko MIPS - Gekko - Lil'Gekko MIPS - Lil'Gekko - ATTACHMENT: strap - WEIGHT: 3g - MATERIAL: Nylon
Lazer Sport Strap Divider For Thin Straps
$3.99
Strap divider for thin Lazer helmet straps COMPATIBILITY - Bullet 2.0 - G1 MIPS - G1 - Z1 MIPS - Z1 - Century MIPS - Century - Victor - Wasp Air Tri - Impala - ATTACHMENT: strap - WEIGHT: 3g - MATERIAL: Nylon
Lazer Sport Strap Dividers for Thick Straps
$35.00
Strap dividers for thick Lazer helmet straps COMPATIBILITY - Blade+ MIPS - Blade+ - Tonic MIPS - Tonic - Coyote MIPS - Coyote - Chiru - Next+ - Cameleon MIPS - Compact DLX MIPS - Compact DLX - Compact - J1 - Gekko MIPS - Gekko - Lil'Gekko MIPS - Lil'Gekko - ATTACHMENT: strap - MATERIAL: Nylon
Lazer Sport Twist Cap
$17.99
Change ventilation options with a twist! Choose between aerodynamic performance or up to 11% more ventilation with a rotation of the Twistcap. COMPATIBILITY - Century MIPS - Century - ATTACHMENT: magnetic - WEIGHT: 28g - MATERIAL: Nylon
Lazer Sport Urbanize Clear Lens
$34.99
Magnetic mount lens for Lazer Urbanize helmet The integrated lens is an integral part of the Urbanize helmet. It can be stored on the helmet surface using the magnetic docking when not in use. COMPATIBILITY - Urbanize NTA MIPS - ATTACHMENT: magnetic - WEIGHT: 54g - MATERIAL: Polycarbonate
Lazer Sport Visor - Coyote
$14.99
Visor for Coyote helmet COMPATIBILITY - Coyote MIPS - Coyote - ATTACHMENT: Direct Mount - WEIGHT: 45g - MATERIAL: Nylon
Lazer Sport Visor—Impala
$14.99
Visor for Impala helmet COMPATIBILITY - Impala MIPS - Impala - ATTACHMENT: Direct Mount - WEIGHT: 45g - MATERIAL: Nylon
Lazer Sport Wasp Air Replacement Pads
$10.00
- Replacement X-Static pads for Lazer's Wasp Air Helmet - X-Static pads are an anti-microbial, self-cleaning pad system
Lazer Sport Winter Kit—Urbanize
$19.99
Upgrade your Urbanize helmet and keep the cold on the outside with the Winter Pad Kit! Designed especially for the Urbanize helmet, the Winter Pad Kit will help keep you on the bike during those cold commutes. The kit includes fleece-lined pads, which attach to the helmet straps and help keep your ears insulated from the cold and wind. The kit also includes a plug for the front vent to reduce cold airflow into the helmet. If you ride in the fall, winter or spring the Winter Pad Kit is a "must have" accessory for your Urbanize helmet!
Lazer Sport Z Helmet Buckle
$4.99
Buckle for thick Lazer helmet straps. COMPATIBILITY: - Blade+ MIPS - Blade+ - Tonic MIPS - Tonic - Coyote MIPS - Coyote - Chiru - Next+ - Cameleon MIPS - Compact DLX MIPS - Compact DLX - Compact - J1 - Gekko MIPS - Gekko - Lil'Gekko MIPS - Lil'Gekko - ATTACHMENT: strap - WEIGHT: 5g - MATERIAL: Nylon
Gore Wear C3 GORE-TEX Helmet Cover
$65.00
You need to get out on your bike even in terrible weather. Fitting in an early commute or a mid-winter ride is easier when you're warm, comfortable, and visible. Keeping your head warm in bad weather can be the best way to fend off the elements. - GORE-TEX Product: durably waterproof, windproof and extremely breathable - Reflective band - Elastic hem - Reflective logo - Durably waterproof - Extremely breathable - All weather conditions - Engineered for Cycling - Weight: 0.8 ounces
Garneau H2 Helmet Cover
$34.99
When chilly, soggy weather rolls through, Garneau's H2 Helmet Cover keeps you both warm and dry. It's made from a polyurethane-coated spandex that's water-resistant. The sealed seams and a snug stretch band that fits easily over your helmet also keep water from seeping in. Plus, when the sun's not shining, the high-visibility yellow color and reflective accents will help make you visible to others. Technical Details: - Fabric : Polyurethane-coated Carbon WR spandex - Seams: Sealed seams: Keep you dry - Visibility Features: Reflective accent
CatEye Helmet Mount
$11.95
This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.
Bontrager Ballista MIPS Fit Pads
$10.99
Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell and fit just like it did when it was new. Key features - Original equipment replacement fit pads for your Bontrager Ballista MIPS helmet - Also compatible with non-MIPS Bontrager Ballista helmet - Helmet fit pads should be replaced once per year to maintain fit and hygiene
Bontrager Ballista Vent Covers
$5.99
These covers are key to keeping your Ballista helmet aero and cool. No matter what happens, these original replacements will get them working and looking like new. - Works perfectly with your Bontrager Ballista helmet - Original equipment replacement vent covers
Bontrager Blaze WaveCel Bike Helmet Fit Pad
$18.99
New pads help your helmet fit best and smell fresh Let's face it—we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. - Original equipment replacement fit pads for your Bontrager Blaze WaveCel helmet - Helmet fit pads should be replaced once a year to maintain fit and hygiene
Bontrager Blaze WaveCel Bike Helmet Visor
$14.99
Replacement visors keep your lids fresh Helmet visors work hard to get the sun out of your eyes and keep you looking good. No matter what happens, these original replacements will get them working like new. - Works perfectly with your Bontrager Blaze WaveCel helmet - Original equipment replacement visor
Bontrager Blaze WaveCel NoSweat Bike Helmet Fit Pad
$26.99
New pads help your helmet fit best and smell fresh Let's face it—we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. - Original equipment replacement fit pads for your Bontrager Blaze WaveCel helmet - NoSweat keeps sweat out of eyes through channeled pads for constant clarity - Helmet fit pads should be replaced once a year to maintain fit and hygiene
Bontrager Blendr Blaze WaveCel Bike Helmet Mount
$19.99
Where your gaze goes, your light follows Add the safety of visibility to your helmet and light up the trail with help from the Bontrager Blaze helmet mount. Compatible with all Ion headlights. - Quickly mount front light and camera accessories on the front of your Bontrager Blaze WaveCel helmet - Tested with an accelerometer for intended breakaway point if involved in a crash
Bontrager Blendr Circuit MIPS Bike Helmet Mount Front
$19.99
Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet. - Tested with an accelerometer for intended breakaway point if involved in a crash
Bontrager Charge WaveCel Bike Helmet Fit Pad
$18.99
New pads help your helmet fit best and smell fresh Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. - Original equipment replacement fit pads for your Bontrager Charge WaveCel helmet - Helmet fit pads should be replaced once a year to maintain fit and hygiene
Bontrager Circuit MIPS Bike Helmet Fit Pad
$9.99
Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell and fit just like it did when it was new. - Original equipment replacement fit pads for your Bontrager Circuit MIPS helmet - Also compatible with non-MIPS Bontrager Circuit helmet - Helmet fit pads should be replaced once per year to maintain fit and hygiene - Fits Small, Medium, and Large Bontrager Circuit MIPS Road Bike Helmets
Bontrager Circuit MIPS Fit Pads
$10.99
New pads can help you dial in your perfect fit - keeping you comfortable and looking forward to the next ride. New pads help your helmet fit best and smell fresh Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell and fit just like it did when it was new. Key features - Original equipment replacement fit pads for your Bontrager Circuit MIPS helmet - Also compatible with non-MIPS Bontrager Circuit helmet - Helmet fit pads should be replaced once per year to maintain fit and hygiene
Bontrager Dipper Fit Pads
$3.99
Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. New pads can also help you dial in your perfect fit - keeping you comfortable and looking forward to the next ride. - Original equipment replacement fit pads for your Bontrager Dipper helmet - Helmet fit pads should be replaced once a year to maintain fit and hygiene
Bontrager Dipper MIPS Fit Pads
$6.99
Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell and fit just like it did when it was new. Key features - Original equipment replacement fit pads for Bontrager Dipper MIPS helmets - Not compatible with non-MIPS Bontrager Dipper helmets - Helmet fit pads should be replaced once per year to maintain fit and hygiene
Bontrager Helmet Fit Pad Velcro Kit
$4.99
The key to getting your helmet fit pads stay put Bontrager helmet fit pads are affixed to the inside of the helmet via this Velcro kit. No matter what happens, these original replacements will get them sticking like new. Product details - Replacement adhesive Velcro kit - Compatible with all Bontrager helmets
Bontrager Helmet Fit Pads - Starvos MIPS
$9.99
New pads help your helmet fit best and smell fresh Let's face it—we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new. - Original equipment replacement fit pads for your Bontrager Starvos MIPS helmet - Also compatible with non-MIPS Bontrager Starvos helmet - Helmet fit pads should be replaced once a year to maintain fit and hygiene
Page 1 of 2 Next page